CARLISLE IS40
Read more details in Description tab below
This item requires LTL shipping. Please contact us to order.
SKU:
CARLISLE IS40
Call 855.777.2955 to order
Ideal for All Foam Insulation Applications
Carlisle IS40 6-Zone 15" SCRN Modem Spray Foam Proportioner
Carlisle Spray Technologies built the new IS40 proportioner, part of the IntelliSpray system, to increase productivity and sprayer uptime. With the intuitive, easy to use controls and automation through the system’s fully independent motors and drives, contractors will save in materials and labor. Sprayers will increase productivity by decreasing warm-up time, maintain a consistent temperature and pressure at the gun, and bring next-generation automation to the jobsite. 200-240 Voltage, 2250 Max Pressure, 40 Max Flow Rate, 200 Max Fluid Temp, 350 Max Hose Length.
THE CARLISLE IS40 PROPORTIONER FEATURES
SIMPLE, INTUITIVE DISPLAY
- Brilliant, 15" Full Color Display
- Touchscreen with Intuitive pull-down menus
- Built-in Operating Manuals and Full Motion
- Video Capability
- Intuitive display design makes operation a breeze
PROVEN, INDUSTRIAL GRADE HARDWARE
- Major components field proven with years of run-time in similar chemistry and applications
- Highly engineered to reduce fittings, seals and costly points of failure
- Motor bearing life rated at over 20,000 hours
- Extended warranty on major components
TRUE RATIO CONTROL
- Independent, Servo-driven motors control the flow of A & B materials
- Integral flow meters monitor the flow of A and B materials to assure that foam is applied on-ratio
- System automatically compensates for worn components, plugged filters/lines to keep the operator spraying materials on-ratio
WORK FASTER
- Unique heater technology supports >100°F DeltaT
- Heating capacity allows contractors to increase mix chamber/tip sizes and spray faster
- System can spray most fluids at higher pressures leading to greater yields and productivity
MORE CONTROL
- Operating information can be monitored by an owner/operator remotely when the proportioner is bought with a modem.
- System can be remotely supported from the cloud by our Global Service Center
- IntelliSense Remote allows sprayers to adjust settings directly from the spray area
EASY, MODULAR SERVICE
- Make any repairs from front of machine
- Major components can be replaced in minutes not hours
MORE INTELLIGENCE, LESS EXPERTISE
- Built-in automated procedures free up operators to focus on other spray tasks and not the machine
- Embedded sensors pinpoint problem areas and allow crews to troubleshoot with ease
- Built-in, filter monitoring — automatically alerts operators when inlet filters need to be changed
Call us today at 855-777-2955 to see which Proportioner is right for you!
How do I return an item?
Parts Orders
When ordering parts, be certain you are ordering the correct part. If you are uncertain on which part to order, please call 855.777.2955. To insure that parts are shipped correctly, please always double check your shipping address and speed of shipment (ground, 2-day, overnight) with every parts order.
Return Policy on Parts
Wrong Part Shipped:
It is our goal to ship parts quickly, accurately, and on-time. Any parts that are shipped incorrectly (shipping of wrong or defective part), will receive a full credit (including shipping) if parts are returned in unused condition within 10 days from original receipt. Contact Equipment Options Direct at 855.777.2955 for details prior to return.
Package Damaged in Shipment:
Please inspect all packages carefully prior to accepting the package from your delivery driver. Any damages to packages must be noted at the time of receipt, with the driver, and noted on the delivery form prior to signing.
If shipment damage is not seen until after the driver has left the package, Equipment Options Direct must be notified within 24 hours. In this instance, credit may be limited to amount recovered from delivery carrier. It is important to inspect all packages immediately.
Other Returns:
If you determine a part is no longer needed, or the wrong part was ordered, credit will be issued under the following conditions:
Parts must be returned within 15 days from original receipt Parts must be in new, unused condition.
Shipping is not refundable. A 15% ($5 minimum) restocking fee will be deducted from credit.
Large Equipment and special order items may not be returnable, call for details: 855.777.2955
Should you have questions concerning the best way to return an item, we encourage you to contact customer service. 1-855-777-2955
Parts Orders
When ordering parts, be certain you are ordering the correct part. If you are uncertain on which part to order, please call 855.777.2955. To insure that parts are shipped correctly, please always double check your shipping address and speed of shipment (ground, 2-day, overnight) with every parts order.
Return Policy on Parts
Wrong Part Shipped:
It is our goal to ship parts quickly, accurately, and on-time. Any parts that are shipped incorrectly (shipping of wrong or defective part), will receive a full credit (including shipping) if parts are returned in unused condition within 10 days from original receipt. Contact Equipment Options Direct at 855.777.2955 for details prior to return.
Package Damaged in Shipment:
Please inspect all packages carefully prior to accepting the package from your delivery driver. Any damages to packages must be noted at the time of receipt, with the driver, and noted on the delivery form prior to signing.
If shipment damage is not seen until after the driver has left the package, Equipment Options Direct must be notified within 24 hours. In this instance, credit may be limited to amount recovered from delivery carrier. It is important to inspect all packages immediately.
Other Returns:
If you determine a part is no longer needed, or the wrong part was ordered, credit will be issued under the following conditions:
Parts must be returned within 15 days from original receipt Parts must be in new, unused condition.
Shipping is not refundable. A 15% ($5 minimum) restocking fee will be deducted from credit.
Large Equipment and special order items may not be returnable, call for details: 855.777.2955
Should you have questions concerning the best way to return an item, we encourage you to contact customer service. 1-855-777-2955
Shipping policy
For orders received prior to 3:00 p.m. (Eastern), we do our best to ship same day. There are exceptions. Some items need to be prepped or calibrated before shipping and some items may be out of stock, shipping from a different location, or requiring freight shipping. For these reasons, we cannot guarantee same day shipping.
We ship parts and small equipment based on your selection of overnight, ground, etc, but we cannot guarantee the speed once it is turned over to the shipper.
Please note, some items can only ship via ground shipment, per the carrier’s policy. These items are noted as ground only in the description.
For orders received prior to 3:00 p.m. (Eastern), we do our best to ship same day. There are exceptions. Some items need to be prepped or calibrated before shipping and some items may be out of stock, shipping from a different location, or requiring freight shipping. For these reasons, we cannot guarantee same day shipping.
We ship parts and small equipment based on your selection of overnight, ground, etc, but we cannot guarantee the speed once it is turned over to the shipper.
Please note, some items can only ship via ground shipment, per the carrier’s policy. These items are noted as ground only in the description.
Recently Viewed Products
- Choosing a selection results in a full page refresh.