CARLISLE IS30
Read more details in Description tab below
This item requires LTL shipping. Please contact us to order.
Call 855.777.2955 to order
Ideal for All Foam Insulation Applications
Carlisle IS30 Premier 6 Zone Spray Foam Proportioner
The Carlisle IS30 proportioner is designed for the contractor who’s looking to gain an edge over their competitors. It’s available in two versions: the IS30-Premier. Exclusive features at affordable prices make it the ideal solution for residential projects that require stunning results. 200-240 Voltage, 2250 Max Pressure, 30 Max Flow Rate, 200 Max Fluid Temp, 350 Max Hose Length.
NO MORE OFF-RATIO JOBS AND RE-DO’S
- Independent servo motors control the flow of A & B materials to maintain proper ratio
- Automatic Viscosity Control regulates material pressure and temperature. No need for manual inputs
FASTER START-UP TIME
- Warm up in under 15 minutes, more consistent heat, uniform output, and more spray time
- Automated procedures and troubleshooting
MONITOR & CONTROL WHERE IT’S NEEDED
- Remote connectivity to control and monitor entire system from phone, laptop or pc
- System status lights in proportioner and QuickHeat Hose to keep you on the know while spraying
SIMPLE, INTUITIVE DISPLAY
- Brilliant, Full-color 10" Display
- Touchscreen with intuitive pull-down menus
- Intuitive interface makes operation a breeze
PROVEN, INDUSTRIAL GRADE HARDWARE
- Field-tested components
- Engineered to reduce fittings, seals and costly points of failure
- Motor bearing life rated at over 20,000 hours
- Designed for serviceability
TRUE RATIO CONTROL
- Independent servo motors control the flow of A & B materials
- Integral flow meters monitor the flow of A and B materials to assure that foam is applied on-ratio
- System automatically compensates for worn components, plugged filters/lines to keep the operator spraying materials on-ratio
WORK FASTER, HIGH DELTAT
- Unique heater technology generates >70°F Delta-T
- Heating capacity allows contractors to increase mix chamber/tip sizes and spray faster
- System can spray most fluids at higher pressures leading to greater yields and productivity
TOP-OF-THE-LINE REMOTE CONNECTIVITY*
- Operating information can be monitored by an owner/operator remotely
- Cloud-enabled tech support
- Adjust spray settings remotely from the spray area
- Automatic Viscosity Control (AVC) dials in the temperature and pressure -automatically. (Patent pending)
LESS STUDYING, BETTER RESULTS
- Built-in automated procedures free up time to focus on the spray task
- Embedded sensors pinpoint problem areas and allows troubleshooting with ease
- The built-in filter monitoring automatically alerts operators when inlet filters need to be changed
EASY, MODULAR SERVICE
- Conduct any repairs from the front of the machine
- Replace major components in minutes, instead of hours
PREMIER PLUS INCLUDES:
- Remote Connectivity
- USB Port
- Beacon Light
Call us today at 855-777-2955 to see which Proportioner is right for you!
How do I return an item?
Parts Orders
When ordering parts, be certain you are ordering the correct part. If you are uncertain on which part to order, please call 855.777.2955. To insure that parts are shipped correctly, please always double check your shipping address and speed of shipment (ground, 2-day, overnight) with every parts order.
Return Policy on Parts
Wrong Part Shipped:
It is our goal to ship parts quickly, accurately, and on-time. Any parts that are shipped incorrectly (shipping of wrong or defective part), will receive a full credit (including shipping) if parts are returned in unused condition within 10 days from original receipt. Contact Equipment Options Direct at 855.777.2955 for details prior to return.
Package Damaged in Shipment:
Please inspect all packages carefully prior to accepting the package from your delivery driver. Any damages to packages must be noted at the time of receipt, with the driver, and noted on the delivery form prior to signing.
If shipment damage is not seen until after the driver has left the package, Equipment Options Direct must be notified within 24 hours. In this instance, credit may be limited to amount recovered from delivery carrier. It is important to inspect all packages immediately.
Other Returns:
If you determine a part is no longer needed, or the wrong part was ordered, credit will be issued under the following conditions:
Parts must be returned within 15 days from original receipt Parts must be in new, unused condition.
Shipping is not refundable. A 15% ($5 minimum) restocking fee will be deducted from credit.
Large Equipment and special order items may not be returnable, call for details: 855.777.2955
Should you have questions concerning the best way to return an item, we encourage you to contact customer service. 1-855-777-2955
Parts Orders
When ordering parts, be certain you are ordering the correct part. If you are uncertain on which part to order, please call 855.777.2955. To insure that parts are shipped correctly, please always double check your shipping address and speed of shipment (ground, 2-day, overnight) with every parts order.
Return Policy on Parts
Wrong Part Shipped:
It is our goal to ship parts quickly, accurately, and on-time. Any parts that are shipped incorrectly (shipping of wrong or defective part), will receive a full credit (including shipping) if parts are returned in unused condition within 10 days from original receipt. Contact Equipment Options Direct at 855.777.2955 for details prior to return.
Package Damaged in Shipment:
Please inspect all packages carefully prior to accepting the package from your delivery driver. Any damages to packages must be noted at the time of receipt, with the driver, and noted on the delivery form prior to signing.
If shipment damage is not seen until after the driver has left the package, Equipment Options Direct must be notified within 24 hours. In this instance, credit may be limited to amount recovered from delivery carrier. It is important to inspect all packages immediately.
Other Returns:
If you determine a part is no longer needed, or the wrong part was ordered, credit will be issued under the following conditions:
Parts must be returned within 15 days from original receipt Parts must be in new, unused condition.
Shipping is not refundable. A 15% ($5 minimum) restocking fee will be deducted from credit.
Large Equipment and special order items may not be returnable, call for details: 855.777.2955
Should you have questions concerning the best way to return an item, we encourage you to contact customer service. 1-855-777-2955
Shipping policy
For orders received prior to 3:00 p.m. (Eastern), we do our best to ship same day. There are exceptions. Some items need to be prepped or calibrated before shipping and some items may be out of stock, shipping from a different location, or requiring freight shipping. For these reasons, we cannot guarantee same day shipping.
We ship parts and small equipment based on your selection of overnight, ground, etc, but we cannot guarantee the speed once it is turned over to the shipper.
Please note, some items can only ship via ground shipment, per the carrier’s policy. These items are noted as ground only in the description.
For orders received prior to 3:00 p.m. (Eastern), we do our best to ship same day. There are exceptions. Some items need to be prepped or calibrated before shipping and some items may be out of stock, shipping from a different location, or requiring freight shipping. For these reasons, we cannot guarantee same day shipping.
We ship parts and small equipment based on your selection of overnight, ground, etc, but we cannot guarantee the speed once it is turned over to the shipper.
Please note, some items can only ship via ground shipment, per the carrier’s policy. These items are noted as ground only in the description.
Recently Viewed Products
- Choosing a selection results in a full page refresh.